AFK Stainless Steel High Pressure Cylinder Argon co2 Carbon Dioxide Gas Pressure Regulator Valve 25Mpa
R31 pressura moderatoris
Features pressurae reducer
1. Quinque foramen designof corporis
2. Geminus-scaena pressura reducendo compages
3. Metallum diaphragmatis sigillum meta
4. Corpus sequela: initus et output nexus 1 / 4NPT (F)
5. Securus ad emundare internum compages
6. Filter elementum interius installed
7. Panel adscendens et murum praesto adscendens
8.Optional exitus valvae acus diaphragma
Product parametri Gas Pressura Regulator
| Max pressura diverticulum | 3000，500 psig |
| Exitus pressura | 0~25, 0~50, 0~100, 0~250 psig |
| Probatur pressura | V temporibus maximum pressura rated |
| opus temperatus | -20°F-+446°F(29°C-+66°C) |
| Ultrices rate | 2×10-8cc/sec |
| Cv | 0.06 |
| Corpus Post | 1/4″ NPT ( F ) |
| 1 | Corpus | 316L,Brass |
| 2 | Bonnet | 316L,Brass |
| 3 | Diaphragma | 316L |
| 4 | Strainer | 316L(10um) |
| 5 | Sedes | PCTFE,PTFE,Veapel |
| 6 | Ver | 316L |
| 7 | Stem | 316L |
Ordinare Information
| R31 | L | B | G | G | 00 | 00 | 02 | P |
| Item | Corpus Materiae | CorpusForamen | Inletpressura | Outlet pressura | PressuraMETIOR | Inlet magnitudine | Exitus magnitudine | Optiones |
| R31 | L:316 | M | D:3000psi | G:0-250psig | G:MPa gauge | 00:1/4 NPT(F) | 00:1/4 NPT(F) | P:panel adscendens |
| B:Brass | Q | F:500psi | I:0_100psig | P:Psig/bar gauge | 01:1/4 NPT(M) | 01:1/4 NPT(M) | R: Cum valvae subsidio | |
| K:0-50psig | W: Non METIOR | 23:CGA330 | 10:1/8 OD | N: Cum valvae acu | ||||
| L:0-25psig | 24:CGA350 | 11:1/4 OD | D: Cum diaphragmate valvae | |||||
| Q:30 Hg Vac-30psig | 27:CGA580 | 12:3/8OD | ||||||
| S:30 Hg Vac-60psig | 28:CGA660 | 15:6 mm OD | ||||||
| T:30 Hg Vac-100psig | 30:CGA590 | 16:8mm OD | ||||||
| U:30 Hg Vac-200psig | 52:G5/8-RH(F) | 74:M8X1-RH(M) ; | ||||||
| 63:W21.8-14H(F) | ||||||||
| 64:W21.8-14LH(F) |
Q: Tu es mercaturae comitatu vel fabrica?
A: Nos sumus officinam.
Q: Quousque partus est tempus?
A: Generaliter est 7days si bona in stirpe sunt.vel XV dies si bona non sunt secundum quantitatem.
Q: Quid est termini solucionis?
A: Payment<=1000USD, 100% in antecessum.Payment>=1000USD, 30% T/T in antecessum, statera ante shipment.
Si aliam quaestionem habes, pis liberum contactus nos ut infra:
